Macs Custom Tie-Downs 1-800-666-1586

Rear Spreader Bar Net Pack

Review This Product
Item # 121850
$195.95
Choose your options
Qty:

What's Included

Rear Spreader Bar Nets With Anchor Points

  • Two (2) Rear Spreader Bar Nets with Twisted Snap Hooks
  • Four (4) Recessed D-rings and Backing Plates

Rear Spreader Bar Nets Without Anchor Points

  • Two (2) Rear Spreader Bar Nets with Twisted Snap Hooks

Product Description

Mac's Rear Spreader Bar Nets are the ideal solution for getting your dragster, nostalgia dragster or sprint car from the garage to the track and back again safely. Whether you need anchor points or your trailer already has proper hardware installed, we have an option for you!

  • Dragster Nets - includes 12" spreader bars; fits rear tire sizes ranging from 31" to 35" tall.
  • Nostalgia Nets - includes 9" spreader bars designed for narrower tires; fits rear tires between 29" to 33" tall.
  • Sprint Nets - includes 12" spreader bar, fits tires between 27" - 32" tall.

Rear Spreader Bar Nets

Using a single strap on a rear oversized, soft dragster tire can damage the tire in transit. The Mac's Rear Spreader Bar Nets are built with two (2) billet aluminum spreader bars that disperse the load and eliminate a center groove left on the tire by a standard single strap. The Rear Spreader Bar Nets feature a Twisted Snap Hook on the fixed end and a Direct Hook Ratchet for tensioning.

Optional Recessed D Ring Anchor Points

  • Recessed D Rings (M801).

    Recessed D Rings (M801)

    An industry standard, this 6,000 lb. capacity D-Ring lifts from the recess for easy use. Zinc plated for corrosion resistance.

    Recess hole size: 3 1/2"; Depth: 7/8", Bolt hole size: 3/8"

    Coordinating backing plates are laser cut from 1/4"-thick steel. Together these two pieces provide a rock-solid anchor point for the rear spreader bar nets.


  • Easy Release Ratchet

    Our easy release ratchet handle is better than ever.
    The easy release ratchet handle eliminates any adjustment stickiness

    Recent design changes to our ratchet handles make them better than ever! The strap mandrel is now free-wheeling, eliminating any "stickiness" common when adjusting most other ratchets.

    The one piece handle and addition of mandrel caps makes this handle 40% more rigid and keeps debris out of the moving parts.

    Made in the USA

    We carefully sew and assemble each tie-down strap in our Sandpoint, Idaho shop, allowing us to retain a level of quality that is often lost when manufacturing is outsourced. Plus, we feel good about creating American jobs!


WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

You may also be interested in...

© Copyright 2018 Mac's Custom Tie-Downs. All Rights Reserved | Terms of Service
469059 US 95, Sagle, ID USA 83860 | 1-800-666-1586
Payment Accepted