Macs Custom Tie-Downs 1-800-666-1586

VersaTie Aluminum Track - Surface Mount, Contoured Edge (Series 1)

Review This Product
Item # 210012
$69.95
Choose your options
Qty:

Product Highlights

  • Add flexible tie down attach points to any flat vertical or horizontal surface
  • Easy surface mounted installation offering a finished look
  • Tested to 3000lb Minimum Breaking Strength in vertical pull
  • Remove attachments when a smooth surface is desired
  • Made in the USA!
  • Note: Track does not have installation mounting holes. See notes below for recommended installation. Or, see our predrilled kits.

What's Included

  • (1) VersaTie Series 1 Track Segment in selected length
Need longer track? Check out our 8 foot option or call us at 800-666-1586 for custom lengths up to 16ft!

Product Description

VersaTie Series 1 track adds flexibility to your tie-down system
VersaTie Series 1 track adds flexibility to your tie-down system

Easy, Surface-mounted Installation

The clean, contoured edges of our VersaTie Series 1 track combines a smooth, integrated look with the ease of surface mount installation. This is an excellent track for locating on the top or inside of a truck bed rail, or within the ribs of a truck bed or trailer. Use VersaTie track to add flexibility and options for tying down any load.

Strength to Count On

Our patented, aircraft-grade aluminum VersaTie track is designed to a 3000lb Minimum Breaking Strength (MBS) in vertical pull and a 2000lb MBS at 45°, giving you the capability to handle the heaviest load. There's an attach point every inch, so you can find the perfect anchor points to tame even the most unweildy load.

Custom Look Without the Cost

The VersaTie Track System
The VersaTie Track System

Our VersaTie track is sleek and stylish, because we precision mill each from a single extrusion of aircraft-grade aluminum. In fact, we offer track lengths up to 16 feet—the longest in the industry! If you'd like to purchase track length longer than 8 feet, or would like any customization, please call us at 1-800-666-1586.

A Wide Selection of Attachments available

The value of a track system is in its flexibility. This includes our full complement of fittings to accomplish most tasks, from tie-down rings to removable threaded studs. How you use your VersaTie track system is only limited by your imagination.

Made in the USA

All VersaTie tracks are fabricated right here in Idaho. This allows us to have better quality control, quicker turn-around time on custom orders and it also supports American jobs!

Note Track Installation: Track does not include mounting holes. We recommend attaching the track to your structure using 1/4" Stainless Steel countersink fasteners on 6 inch spacing.

When determining fastener length, include 1/8 inch track thickness to the thickness of the nut, washer and structure. Ensure fastener is sufficient length to will engage the entire thickness of the nut when installed. For pre-drilled tracking and mounting hardware, check out our VersaTie Track Kits.

Still have questions or need a custom solution? Call us at 1-800-666-1586


WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

You may also be interested in...

© Copyright 2018 Mac's Custom Tie-Downs. All Rights Reserved | Terms of Service
469059 US 95, Sagle, ID USA 83860 | 1-800-666-1586
Payment Accepted