Integrated Soft Loops Protect Your Motorcycle's Finish
Watch as we test our strap's breaking strength along side a competitor's strap.
This strap pack offers the same high strength as our standard 1" straps, but with an integrated soft loop. No need to remember seperate soft loops to protect your motorcycle's finish. Mac's exclusive!
Mac's 1" tie-down straps are well known for their strength and dependability. There's good reason why.
It starts with our premium strapping. Rated to 4,000 lbs, the select nylon webbing material we use significantly improves chafing and UV resistance over "box store" straps.
Then, during construction of each strap, we sew all ends using the highest stitch count in the industry. You can see this in our characteristic "double box" stitch pattern that ensures maximum tear resistance. The result is a strap with an incredible 2,800 lb Minimum Breaking Strength (MBS)--more than enough strength for the biggest bike or cargo (recommended working load is 1/3 MBS).
Choose Your Attachment Style
The S-Hook option consists of a heavy-duty 3/8" diameter steel wire hook. This option is favored for its simplicity and ability to attach to metal rails or other locations where a captive hook would not otherwise work.
Mac's S-Hooks are fully encased in a thick, ruggedized vinyl coating for added protection.
S-Hook with Keeper
The S-Hook with Keeper option consists of the same heavy-duty 3/8" diameter steel wire, but with the addition of a spring loaded trap for keeping the hook connected. This option gives you the ability to attach to metal rails, while still having the option of a captive hook when attaching to standard tie-down hard points.
Mac's S-Hook with Keeper is fully encased in a thick, ruggedized vinyl coating for added protection.
Flat Snap Hook
The Flat Snap Hook system consists of spring-loaded captive hooks at each end. This attachment style offers the advantage of preventing the strap from disconnecting even when slack develops. This makes securing cargo easier and is an added measure of safety for the journey.
With the Flat Snap Hook option, the integrated soft loop will have a D-Ring sewn in to the end. Remember, you always want to connect metal to metal so as to prevent wear of the webbing and potential strap failure.
Flat Snap Hooks can be used with most anchor points (e.g., D-Rings) or track systems (e.g., VersaTie, E Track, etc.), provided the hard points and fittings support the load requirement.
Zinc plated for corrosion protection.
Choose Your Tensioner Type
The ratchet tensioner is recommended for heavier applications, such as for the transport of heavy motorcycles, small recreational vehicles or building materials and lumber. The wide, comfortable ratchet handle allows for the development of higher tension with improved slip resistance. The ratchet may not be a good choice if high strap tension could damage the cargo.
Mac's ratchets are well known for how easily they operate, every time. Our unique design resists the binding that can occur on other ratchets from dirt or racking.Â
The Cam Buckle offers a low-profile tensioner that cinches quicker and is perfect for cargo that might be damaged by excessive tension, such as kayaks or other thin-walled equipment.
The Cam Buckle features a spring-loaded thumb-depressed cam, with teeth that engage the strap to hold cargo firmly in place. To adjust, simply thread the strap through the cam buckle and pull taut. Because the Cam Buckle does not have the leverage of a ratchet tensioner, the risk of damage to lightweight cargo is minimized.
Electroplated for corrosion protection.
Made in the USA
We carefully sew and assemble each tie-down strap in our Sandpoint, Idaho shop, allowing us to retain a level of quality that is often lost when manufacturing is outsourced. Plus, we feel good about creating American jobs!
(4) 1" wide straps with ratchet tensioner and integrated soft loops