1" Fixed End

Fixed End as Replacements or Conversion Option

A Fixed End is the traditional end configuration, where a fixed length of webbing, approximately 4" long, separates the attachment hook from the ratchet handle.

Replace old, outdated, or worn fixed ends with these replacements. Choose from several colors of our 4,000 lb rated webbing and 3 popular hardware ends. Select this option and you will receive only the ratchet and hook portion of this item, commonly referred to as the Fixed End. Simply pull the strap material out of your old ratchet, feed the strap through the new ratchet and you're ready to go!

Strong, Dependable and Purpose Built

Mac's 1" tie-down straps are well known for their strength and dependability. There's good reason why. It starts with our premium strapping. Rated to 4,000 lbs, the select nylon webbing material we use significantly improves chafing and UV resistance over "box store" straps.

Then, during construction of each strap, we sew all ends using the highest stitch count in the industry. You can see this in our characteristic "double box" stitch pattern that ensures maximum tear resistance. The result is a strap with an incredible 2,800 lb Minimum Breaking Strength (MBS)--more than enough strength for the biggest bike or cargo (recommended working load is 1/3 MBS).

The quality of Mac's 1" straps make them an excellent choice for securing your motorcycle or other important cargo.

Choose Your Attachment Style

  • Choose the S-Hook for attaching to structural components.


    The S-Hook option consists of a heavy-duty 3/8" diameter steel wire hook. This option is favored for its simplicity and ability to attach to metal rails or other locations where a captive hook would not otherwise work.

    Mac's S-Hooks are fully encased in a thick, ruggedized vinyl coating for added protection.

  • Choose the S-Hook with Keeper for attaching to structural components and still have the option of a captive hook.

    S-Hook with Keeper

    The S-Hook with Keeper option consists of the same heavy-duty 3/8" diameter steel wire, but with the addition of a spring loaded trap for keeping the hook connected. This option gives you the ability to attach to metal rails, while still having the option of a captive hook when attaching to standard tie-down hard points.

    Mac's S-Hook with Keeper is fully encased in a thick, ruggedized vinyl coating for added protection.

  • Choose the Flat Snap Hook option for added safety.

    Flat Snap Hook

    The Flat Snap Hook system consists of spring-loaded captive hooks at each end. This attachment style offers the advantage of preventing the strap from disconnecting even when slack develops. This makes securing cargo easier and is an added measure of safety for the journey.

    Flat Snap Hooks can be used with most anchor points (e.g., D-Rings) or track systems (e.g., VersaTie, E Track, etc.), provided the hard points and fittings support the load requirement.

    Zinc plated for corrosion protection.

Made in the USA

We carefully sew and assemble each tie-down strap in our Sandpoint, Idaho shop, allowing us to retain a level of quality that is often lost when manufacturing is outsourced. Plus, we feel good about creating American jobs!