Mac's Front Drag Nets is the ideal solution for getting your dragster from the garage to the track and back again safely. Whether you need anchor points or your trailer already has proper hardware installed, we have an option for you!
Front Drag Nets
Though not all racers will tie down the front of the car, there's an option available if you do. Mac's Front Drag Nets are built from our 1" webbing and fit perfectly over the front tires to ensure the front of the vehicle stays stationary.
Front Drag Nets with Single Studs
If you choose to purchase the Full Drag Pack with Anchor Points, the Front Drag Nets will feature a VersaTie Single Stud Tie-Down Ring sewn directly to the ends of the net, making securing it with the VersaTie anchor plates a snap. The ring freely swivels to prevent binding and ensures good load alignment. The Single Stud Tie-Down Ring is comprised of a cadmium plated alloy steel stud, an anodized aluminum body and a stainless steel ring, ensuring years of trouble-free use.
Front Drag Nets with Flat Snap Hooks
If you choose the option without Anchor Points, the Front Drag Nets come with a Flat Snap Hook system that consists of spring-loaded captive hooks at each end. This attachment style offers the advantage of preventing the strap from disconnecting even when slack develops. This makes securing cargo easier and is an added measure of safety for the journey.
Flat Snap Hooks can be used with most anchor points (e.g., D-Rings) or track systems (e.g., VersaTie, E-Track, etc), provided the hard points and fittings support the load requirement.
Optional VersaTie Anchor Points
VersaTie Anchor Plates
Each anchor plate assembly is designed to a 3,000lb Minimum Breaking Strength (MBS) in vertical pull and a 2,000lb MBS at 45° (Recommended working load is 1/3 MBS). The tie-down ring freely swivels to prevent binding and ensure good load alignment.
The tie-down ring in this application will be attached to the Front Drag Net and when removed leaves only the smooth contoured black anodized anchor plate.
One Inch Ratchet
The ratchet tensioner is recommended for heavier applications, such as for the transport of heavy motorcycles, small recreational vehicles or building materials and lumber. The wide, confortable ratchet handle allows for the development of higher tension with improved slip resistance. The ratchet may not be a good choice if high strap tension could damage the cargo. Mac's ratchets are well known for how easily they operate, every time. Our unique design resists the binding that can occur on other ratchets from dirt or racking.
The one piece handle and addition of mandrel caps makes this handle 40% more rigid and keeps debris out of the moving parts.
Made in the USA
We carefully sew and assemble each tie-down strap in our Sandpoint, Idaho shop, allowing us to retain a level of quality that is often lost when manufacturing is outsourced. Plus, we feel good about creating American jobs!
Front Drag Nets With Anchor Points
Two (2) Front Drag Nets with Single Stud Rings
Four (4) VersaTie Single Stud Anchor Plate Assemblies