When it comes to securing your vehicle, motorcycle and all your gear/cargo, having the right anchor point is just as important as the tie-down straps themselves. With Mac's track offerings, the uses are endless: trailer floors, wall and ceilings, truck beds and even van conversions. Let your imagination run wild.
VersaTie L-Track
Four profiles, custom lengths up to 16' and custom hole patterns, if necessary. Our VersaTie L-track is sleek because we precision mill each track from a single extrusion of aluminum. The value of our track system is in its flexibility, and how you use your VersaTie track system is only limited by your imagination!
- Series 1: Surface-Mounted Track with Contoured Edge. Combines a smooth, integrated look with the ease of surface-mounted installation.
- Series 2: Recess-Mounted Track with Flush Edge. When you want flexible tie-down points but don't want the raised profile of a typical track system, this track recess mounts to provide a smooth, flush finish.
- Series 3: Surface-Mounted Track with Wide Contoured Edge. Features gradually contoured edges for a stylish look.
- Series 4: Recess-Mounted Track with Flanged Edge. The low profile of a recessed track with the added protection of a surface flange, to cover the cut edges for a clean finish. This track works particularly well on coated trailer surfaces to protect the free edges from delamination.
Watch how to install our VersaTie Track here
Working on a van conversion? Use Mac's VersaTie track on the floor, walls and ceiling to keep gear secure and out of the way.
E/A-Track
An ideal solution for vehicle transport, commercial and industrial applications, our E/A-Track (aka aluminum E-Track) fits a variety of fittings for secure tie-down points anywhere on the floor or wall of your trailer.
Engineered to accommodate vertical applications, the Mac's E-Track features a thicker edge on one side for extra support when screwed or bolted to a trailer or shed wall. Orient the thick edge at the bottom so that the shoring beam or fitting puts the most pressure on the thicker side.
HD Tube Track
The strongest track solution in the industry, the one-of-a-kind HD Tube Track (patent-pending) is specifically designed to replace a partial strip of your trailer's wood decking. When installed, the HD Tube Track lies flush with the trailer deck. Attachment holes hit common trailer cross-member center lines and can be bolted or welded in place.
Even better, it's compatible with the Mac's D-Ring and Low-Profile Lashing Winch.
Trusted by Top Manufacturers
For more than 30 years, top trailer manufacturers have chosen Mac's as a standard track offering. You can choose the track profile and location, and have it installed directly from the manufacturer.
