PiVOT Adapter for Ford 3-Valve V8 4.6L Only

With Mac's PiVOT Engine Lift Adapter Plates, you can use your Mac's PiVOT on a wide range of engine that don't have a common carburetor base flange for attachment, from the Ford Flathead 8 to the GM LS9. Unlike using chains or other bulky engine lift solutions, this plate is designed to fit compactly against the engine for significant contact risk reduction with engine compartment surfaces and wires.

Each Mac's PiVOT Engine Lift Adapter Plate attaches to the Mac's PiVOT using the same four grade-8 bolts (included), so a single Mac's PiVOT with multiple adapters is all you need to work with the most popular engine families. You can use the Mac's PiVOT on its own to pull an old flathead, then attach the adapter to the Mac's PiVOT and you're ready to complete your install. It's that simple. Constructed from 1/4" and 3/8" steel, we've designed each adapter to take advantage of the best attach location for that engine. Our "plate-style" adapters are designed to attach to the "intake valley", while "cradle-style" adapters attach to the cylinder head exhaust ports.

All the bolts needed to attach the adapter to the PiVOT are included. The small footprint of each adapter, coupled with the fine tilt control of the Mac's PiVOT gives you unprecedented control during engine install, making even the most challenging installs a one-man job. For example, it only takes 18 minutes to install a flathead and '39 trans using Mac's PiVOT and the correct adapter plate.

Engine attach fasteners not included. Proper fastener selection to attach the adapter plate to the engine is the responsibility of the installer.