7" H Tilt Trailer Ramp – 5.5 Degree Approach Angle

This set of 7-inch high trailer ramps makes loading your race car, sports car or other low-profile vehicle onto a tilt trailer an easy, scrape-free process on track day, at a car show, or during a multi-state trip.

Use our trailer ramp calculator to make sure you're choosing the ramp that's tailored to your car and trailer needs. Both 7-inch high trailer ramps measure 74 inches long and have a 5.5-degree approach angle. Each lightweight 15-pound ramp can hold up to 1,500 pounds and comes with a built-in carrying strap. They are ideal for tire widths up to 12 inches. To use them with your tilt trailer, simply lower your trailer door down into the 5-inch long by 1-inch high notch and drive your car up and into your trailer - it’s that easy!

These tilt trailer ramps are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.