6' VersaTie Recess-Mounted Track with Flanged Edge (Series 4)

Our VersaTie Series 4 track provides the low profile of a recessed track with the added protection of a surface flange, to cover the cut edges for a clean finish. This track works particularly well on coated trailer surfaces to protect the free edges from delamination.

Our patented aluminum VersaTie track is designed to a 3,000 lb. Minimum Breaking Strength (MBS) in vertical pull and a 2,000 lb. MBS at 45°, giving you the capability to handle the heaviest load. There's an attach point every inch, so you can find the perfect anchor points to tame even the most unwieldy load.

Track does not include mounting holes. We recommend attaching the track to your structure using 1/4" Stainless Steel countersink fasteners on 6" spacing. When determining fastener length, include 1/8-inch track thickness to the thickness of the nut, washer and structure. Ensure fastener is sufficient length to engage the entire thickness of the nut when installed. For pre-drilled tracking and mounting hardware, check out our VersaTie Track Kits.